ChartType in RunTime

Could I set up Chart type in run-time. The attempt to set <Type> attribute
inside RDL in the following way:
<Chart Name="1">
...
<Type> = Parameters!ReportChart.Value</Type>
was failed
"Deserialization failed: Requested value =Parameters!ChartType.Value was not
found."
Any suggestion?
Regards
YuriPlease read these postings:
http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=eda1cbbf-cb32-4ae3-903b-eff73af5cdc6&sloc=en-us
http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=a1325500-ca6c-4a71-ad3f-6a59dac96d88&sloc=en-us
--
This posting is provided "AS IS" with no warranties, and confers no rights.
"Yuri Belenky" <yurib@.mercatus.no> wrote in message
news:u3HYLMGgEHA.536@.TK2MSFTNGP11.phx.gbl...
> Could I set up Chart type in run-time. The attempt to set <Type> attribute
> inside RDL in the following way:
> <Chart Name="1">
> ...
> <Type> = Parameters!ReportChart.Value</Type>
> was failed
> "Deserialization failed: Requested value =Parameters!ChartType.Value was
not
> found."
> Any suggestion?
> Regards
> Yuri
>|||Thanks a lot.
"Robert Bruckner [MSFT]" <robruc@.online.microsoft.com> wrote in message
news:O3lz4oIgEHA.3932@.TK2MSFTNGP09.phx.gbl...
> Please read these postings:
> http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=eda1cbbf-cb32-4ae3-903b-eff73af5cdc6&sloc=en-us
> http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=a1325500-ca6c-4a71-ad3f-6a59dac96d88&sloc=en-us
> --
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "Yuri Belenky" <yurib@.mercatus.no> wrote in message
> news:u3HYLMGgEHA.536@.TK2MSFTNGP11.phx.gbl...
>> Could I set up Chart type in run-time. The attempt to set <Type>
>> attribute
>> inside RDL in the following way:
>> <Chart Name="1">
>> ...
>> <Type> = Parameters!ReportChart.Value</Type>
>> was failed
>> "Deserialization failed: Requested value =Parameters!ChartType.Value was
> not
>> found."
>> Any suggestion?
>> Regards
>> Yuri
>>
>|||Hi Robert,
I have this same question, although when i click the links they dont work'
Any help would be great.
Thanks in Advance
Shea
"Robert Bruckner [MSFT]" wrote:
> Please read these postings:
> http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=eda1cbbf-cb32-4ae3-903b-eff73af5cdc6&sloc=en-us
> http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=a1325500-ca6c-4a71-ad3f-6a59dac96d88&sloc=en-us
> --
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Yuri Belenky" <yurib@.mercatus.no> wrote in message
> news:u3HYLMGgEHA.536@.TK2MSFTNGP11.phx.gbl...
> > Could I set up Chart type in run-time. The attempt to set <Type> attribute
> > inside RDL in the following way:
> > <Chart Name="1">
> > ...
> > <Type> = Parameters!ReportChart.Value</Type>
> >
> > was failed
> > "Deserialization failed: Requested value =Parameters!ChartType.Value was
> not
> > found."
> >
> > Any suggestion?
> >
> > Regards
> > Yuri
> >
> >
>
>|||Unfortunately, the news server does not keep an unlimited history of
postings. It seems that both threads have been already removed because they
were too old.
To answer the question: dynamic expression-based chart types are not
available. The closest you can get today is to have multiple charts defined
in your report with different chart types and dynamically hide all of them
(through the Visibility.Hidden property) except for the one you want show.
If you want to change the chart type based on the amount of datapoints, you
might also want to look into using drillthrough actions on the chart. The
main chart would show an aggregated view of the data. Clicking on one of the
data points will then drill through to another report with a detailed view
of the data.
--
This posting is provided "AS IS" with no warranties, and confers no rights.
"Shea Strickland" <SheaStrickland@.discussions.microsoft.com> wrote in
message news:6A9B2659-3337-4186-B189-CC4FB7CDC7D6@.microsoft.com...
> Hi Robert,
> I have this same question, although when i click the links they dont
work'
> Any help would be great.
> Thanks in Advance
> Shea
> "Robert Bruckner [MSFT]" wrote:
> > Please read these postings:
> >
> >
http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=eda1cbbf-cb32-4ae3-903b-eff73af5cdc6&sloc=en-us
> >
> >
http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=a1325500-ca6c-4a71-ad3f-6a59dac96d88&sloc=en-us
> >
> > --
> > This posting is provided "AS IS" with no warranties, and confers no
rights.
> >
> >
> > "Yuri Belenky" <yurib@.mercatus.no> wrote in message
> > news:u3HYLMGgEHA.536@.TK2MSFTNGP11.phx.gbl...
> > > Could I set up Chart type in run-time. The attempt to set <Type>
attribute
> > > inside RDL in the following way:
> > > <Chart Name="1">
> > > ...
> > > <Type> = Parameters!ReportChart.Value</Type>
> > >
> > > was failed
> > > "Deserialization failed: Requested value =Parameters!ChartType.Value
was
> > not
> > > found."
> > >
> > > Any suggestion?
> > >
> > > Regards
> > > Yuri
> > >
> > >
> >
> >
> >|||Robert,
Thanks for the speedy reply, I was heading that way, that post just sounded
like you could do dynamic chart types.
Thanks Again
Shea
"Robert Bruckner [MSFT]" wrote:
> Unfortunately, the news server does not keep an unlimited history of
> postings. It seems that both threads have been already removed because they
> were too old.
> To answer the question: dynamic expression-based chart types are not
> available. The closest you can get today is to have multiple charts defined
> in your report with different chart types and dynamically hide all of them
> (through the Visibility.Hidden property) except for the one you want show.
> If you want to change the chart type based on the amount of datapoints, you
> might also want to look into using drillthrough actions on the chart. The
> main chart would show an aggregated view of the data. Clicking on one of the
> data points will then drill through to another report with a detailed view
> of the data.
> --
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Shea Strickland" <SheaStrickland@.discussions.microsoft.com> wrote in
> message news:6A9B2659-3337-4186-B189-CC4FB7CDC7D6@.microsoft.com...
> > Hi Robert,
> >
> > I have this same question, although when i click the links they dont
> work'
> >
> > Any help would be great.
> >
> > Thanks in Advance
> > Shea
> >
> > "Robert Bruckner [MSFT]" wrote:
> >
> > > Please read these postings:
> > >
> > >
> http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=eda1cbbf-cb32-4ae3-903b-eff73af5cdc6&sloc=en-us
> > >
> > >
> http://msdn.microsoft.com/newsgroups/default.aspx?dg=microsoft.public.sqlserver.reportingsvcs&mid=a1325500-ca6c-4a71-ad3f-6a59dac96d88&sloc=en-us
> > >
> > > --
> > > This posting is provided "AS IS" with no warranties, and confers no
> rights.
> > >
> > >
> > > "Yuri Belenky" <yurib@.mercatus.no> wrote in message
> > > news:u3HYLMGgEHA.536@.TK2MSFTNGP11.phx.gbl...
> > > > Could I set up Chart type in run-time. The attempt to set <Type>
> attribute
> > > > inside RDL in the following way:
> > > > <Chart Name="1">
> > > > ...
> > > > <Type> = Parameters!ReportChart.Value</Type>
> > > >
> > > > was failed
> > > > "Deserialization failed: Requested value =Parameters!ChartType.Value
> was
> > > not
> > > > found."
> > > >
> > > > Any suggestion?
> > > >
> > > > Regards
> > > > Yuri
> > > >
> > > >
> > >
> > >
> > >
>
>